Pebblecrete Removal

Pebblecrete Removal is one of our team’s many specialties. Our Dust-Free Pebblecrete Removal team has been trained, licensed, insured, and equipped with all the Personal Protective Equipment (PPE) and the most high-end, latest-model, demolition hammers, concrete grinders, and dust extractors from the most well-known brands to get the job done safer, faster and more efficiently than our competitors while still maintaining a better price!

Our team that specializes in Dust-Free Pebblecrete Removal will come to your property, Remove Your Pebblecrete, and then we can also offer a Concrete Grinding service if there is any remaining residue on the floors after the Pebblecrete Removal process has been completed.

At Pebblecrete Removal Sydney we use high-powered commercial dust extractors connected directly to our commercial Concrete Grinders as well as a dust extraction system connected to our demolition hammers to achieve the highest quality results for our clients while Removing Pebblecrete maintaining a virtually Dust-Free environment*

We Will Beat All Of Our Competitors Quotes By Up To 10%*
We Will Never Ever Be Beaten On Price At Pebblecrete Removal Sydney!
We Also Offer Massive Discounts Off Our Normal Advertised Prices If You Have A Large Job!

Pebblecrete

Our Pebblecrete Removalist team are fully qualified, licensed, and insured Pebblecrete Removal professionals. We have perfected the strategy of clean, fast, affordable, and efficient Dust-Free Pebblecrete Removal throughout Sydney.

We begin by jackhammering your Pebblecrete up using only the highest quality Hilti jackhammers which will fast-track your project and leave you inconvenienced for as little time as possible.

We then use our Dustless Concrete Grinding System which has a vacuum attachment to remove all your remaining Pebblecrete residue if needed. The floor is then vacuumed leaving you with a floor that is ready to accept any new floor coverings.

Please note that should your new floor coverings require your floor to be leveled to comply with your new floor coverings we can provide a quote for all Floor Levelling services required.

We then take all our mess, dust, and waste to a local resource management centre leaving your property clean and ready for the re-installation of any new flooring system!

We keep dust to an absolute minimum. We can’t promise no dust at all but we will always clean up the best that we can and use all the latest methods, technology, and equipment to make it a Dust-Free Pebblecrete Removal experience.

We leave your property clean, vacuumed, and tidied, with all waste removed by our team and disposed of. Most Dust-Free Pebblecrete Removal jobs take us less than a day, leaving you to get on with the rest of your project.

Our staff are experienced and professional Dust-Free Pebblecrete Removalists, they know exactly how to go about the job of Pebblecrete stripping safely and quickly.

Our Dust-Free Pebblecrete Removal team prides itself on its customer service, its ability to get the job done when other companies can’t, and an end result that the customer is always happy with.

– We are a fully insured business with worker’s compensation, insured for public liability and all employees have white card health and safety and COVID vaccinations.

– Our highly trained staff will always work in a safe and efficient manner while using high-quality Personal Protective Equipment (PPE) and Dust Extraction Equipment.

Why Do So Many People Have Pebblecrete Driveways, Pools, Patios, etc.?

Pebblecrete was created back in the 1960s and back in those days, everyone had Pebblecrete driveways. fast forward 50 years and you still see these tired, old, ugly driveways everywhere throughout Sydney.

The ugly concrete Pebblecrete surfaces are everywhere. Pebblecrete did serve its original purpose which was to create a non-slip surface, but the reality is we now have an incredible range of attractive non-slip surfaces for your driveway, patio, pool surrounds, etc.

So perhaps it’s time to finally remove the incredibly old and ugly Pebblecrete and really bring your property back to life!

Common Issues With Pebble Crete

– Pebble Crete is often tired, old looking.

– Moss & mould gets stuck constantly throughout the Pebble Crete

– Pebble Crete stains easily and is incredibly hard to clean

–  Easily picks up rust & oil stains throughout the Pebble Crete

– Pebble Crete is a very outdated style

Replacing Your Ugly Pebblecrete Surface Is Quite Simple And Cost-Effective In A Renovation!

these days with new concrete resurfacing techniques, you can replace your ugly pebblecrete surface with a fresh new modern look that will add great value to your home, it’s a simple, fast, and cost-effective way to give your home that boosts what it needs!

What Are The Different Installation Methods For Pebblecrete?

– Glue
– Laid On Dirt (No Concrete)

– Screed
– Cement
– Sand & Cement

– Double Layer

Dust-Free Pebblecrete Removal

Will The Job Be 100% Dust-Free?

How Do We Achieve An Almost 90 – 99.99% Dust-Free Flooring Removal and Concrete Grinding Experience For Our Clients?

Here at Dust-Free Pebblecrete Removal Sydney, we specialize in Dust-Free Pebblecrete Removal. We employ a speciality system that suctions and removes dust and debris directly from our tools into a powerful commercial dust extractor. Our equipment is powerful, strong, and guaranteed to significantly reduce, or even completely eradicate, the dust and debris that is often associated with Dust-Free Pebblecrete Removal and replacement projects.

Our specially designed dust-free equipment makes the Pebblecrete Removal process much faster than traditional Pebblecrete Removal. It is also more efficient than traditional removal techniques and is substantially cleaner and safer. This gives our Dust-Free Pebblecrete Removal process the added benefit of being the most environmentally friendly solution.

After the Dust-Free Pebblecrete Removal process, we will grind your concrete slab with the use of high-powered Dust-Free Concrete Grinding equipment that is connected directly to a high-powered commercial dust extractor. We will also perform demolition services with the use of high-powered commercial dust extraction equipment plugged directly into our tools.

Unfortunately, small amounts of dust are still produced and cannot be completely eliminated even with the most expensive high-end equipment and the latest technology. It should also be noted that certain equipment such as Jackhammers has a harder time trying to contain the dust even with the use of high-end dust extractors. While Concrete Grinders are able to contain dust a lot more easily. (Roughly 90 – 99.99% of the dust is still sucked up by a 3-engine high-powered commercial dust extractor that is plugged directly into the equipment) but sometimes a small amount of dust can still escape.

If you are concerned about the small amounts of dust that may possibly get into areas that we are not working in such as the kitchens, bathrooms, cabinets, etc. we would advise that you seal off those areas that we are not working in with plastic and sticky tape before our team arrives to avoid delays.

Click Here To Learn More About Dust-Free Flooring Removal and Concrete Grinding

Pebblecrete Removal Cost
(Glued)

$25 Per Square Metre*

Pebblecrete Removal Price
(Screed/Cement/Sand And Cement)

$48 Per Square Metre*

Pebblecrete Removal Cost
(Double Layer)

$58 Per Square Metre*

Pebblecrete Removal Costs can vary quite a lot from company to company or private contractor regarding the cost of Pebblecrete Removal, here at Pebblecrete Removal Sydney we guarantee that we’ll always have the lowest Pebblecrete Removal prices in Sydney. We will always be upfront with the Pebblecrete Cost, with no hidden extras.

Our Pebblecrete Removal (Glued) Costs Are:
$25 per square metre*

Our Pebblecrete Removal (Screed, Cement, Sand And Cement) Cost Is:
$48 Per Square Metre*

Our Pebblecrete Removal (Double Layer) Cost Is:
$58 Per Square Metre*

Other Pebblecrete Removal contractors and Pebblecrete Removal companies that Remove Pebblecrete regardless of job size will make you hire a skip bin which will cost a huge amount ($375 – $1,000+). Which will have to sit in your front yard for days while you deal with the annoyance of organising it and the large cost of the whole process.

Here at Pebblecrete Removal Sydney, we come in, Remove your Pebblecrete, as well as grind down any Pebblecrete Glue Residue, our team will sweep and vacuum your property to clean up any dust!

Then once we are finished, we will also take all the waste to a local resource management centre for you (Recycling whenever possible) which will be far cheaper than you having to hire a skip bin and dealing with the frustration of that whole process!

Is Concrete Grinding Required After Pebblecrete Removal?

Yes, Once our team has removed your Pebblecrete you will see either a glue residue that will need to be ground off your concrete using a Concrete Grinder. Or you will see cement bedding underneath the Pebblecrete that will also need to be removed with jackhammers (the bedding can range from 1mm– 100mm thick) after the cement bedding has been removed you will also need to grind your concrete to remove any remaining residue to allow the successful reinstallation of a new flooring system, coating or floor leveling compound.

How Much Does Concrete Grinding Cost Per Square Metre?

General Grind – $10 – $60 Per Square Metre*

Coating Removal – $10 – $90 Per Square Metre*

How Much Does Concrete Grinding Cost Per Square Metre? Concrete Grinding costs vary quite a lot from company to company or private contractor to private contractor. Here at Concrete Grinding Sydney, we guarantee that we will always be upfront with pricing, with no hidden extras.

On average Concrete Grinding Costs $10 – $60 Per Square Metre for jobs that require a General Grind.

On average Concrete Grinding Costs $10 – $90 Per Square Metre for jobs that require a Coating Removal.

These are the factors that we take into account when quoting:
– How many square metres require Concrete Grinding
– How many MM may need to be ground down
– The condition of the concrete that requires Concrete Grinding
– What service is required (Removal? General Grind? Coating Removal?)
– Access to the site (Stairwell? > Lift?)
– What level is the property on?
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)

Other Concrete Grinding contractors and Concrete Grinding companies that Grind Concrete do not meet the standards that we do at Concrete Grinding Sydney. We use only the highest quality products that are available on the market.

Here at Concrete Grinding Sydney, we come in and do a swift Floor Preparation and Concrete Grinding service for all of our clients, We Concrete Grind and Prime all floors prior to Floor Levelling to ensure a flawless installation without failure.

– The main deciding factor is ‘What Service Is Required’ for example a simple light grind will be far cheaper than removing a thick Waterproof Coating.

How Much Does It Cost To Remove Pebblecrete From Your Stairs?

Stairs – $20 – $40 Per Step*

Landings – $40 – $80 Per Landing*

On average Pebblecrete Removal from Stairs Costs $20 – $40 Per Step for jobs that require Removal.

On average Pebblecrete Removal from Landings Costs $40 – $80 Per Landing for jobs that require Removal.

These are the factors that we take into account when quoting:
– How many steps and landings require removal
– The size of the steps (Extra Wide or Extra Long Steps may increase the prices listed above)
– How thick the coating is on the stairs
– The condition of the concrete that requires Hand Grinding
– What service is required (Removal? General Grind? Coating Removal?)
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– Access to the site (Stairwell? > Lift?)
– How many MM may need to be ground down

These prices may vary depending on a large range of factors though, so please only use this as a general guide.

– The main deciding factor is ‘What Service Is Required’ for example a simple light grind will be far cheaper than removing a thick Waterproof Coating.

How Much Does It Cost To Concrete Grind Residue From Pebblecrete Stairs?

Stairs – $20 – $40 Per Step*

Landings – $40 – $80 Per Landing*

On average Concrete Grinding Stairs Costs $20 – $40 Per Step for jobs that require Hand Grinding.

On average Concrete Grinding Landings Costs $40 – $80 Per Landing for jobs that require Hand Grinding.

These are the factors that we take into account when quoting:
– How many steps and landings require Hand Grinding
– The size of the steps (Extra Wide or Extra Long Steps may increase the prices listed above)
– How thick the coating is on the stairs
– The condition of the concrete that requires Hand Grinding
– What service is required (Removal? General Grind? Coating Removal?)
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– Access to the site (Stairwell? > Lift?)
– How many MM may need to be ground down

These prices may vary depending on a large range of factors though, so please only use this as a general guide.

– The main deciding factor is ‘What Service Is Required’ for example a simple light grind will be far cheaper than removing a thick Waterproof Coating.

How Much Does It Cost To Remove Pebblecrete From Your Skirting Boards?

$10 – $60 Per Metre*

At Pebblecrete Removal Sydney we charge $10 – $60 per metre* for the removal of Pebblecrete Skirting Boards.

These are the factors that we take into account when quoting:

– What the height is of the skirtings that we need to remove
– How many metres require Concrete Grinding
– How thick the coating is on the skirtings
– The condition of the concrete that requires Concrete Grinding
– What service is required (Removal? General Grind? Coating Removal?)
– Access to the site (Stairwell? > Lift?)
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– How many MM may need to be ground down

These prices may vary depending on a large range of factors though, so please only use this as a general guide

– The main deciding factor is ‘What Service Is Required’ for example a simple light grind will be far cheaper than removing a thick Waterproof Coating.

How Much Does Concrete Grinding Skirting Boards Cost?

General Grind – $10 – $30 Per Metre*

Coating Removal – $10 – $60 Per Metre*

On average Concrete Grinding Skirtings Costs $10 – $30 Per Metre* for jobs that require a General Grind.

On average Concrete Grinding Skirtings Costs $10 – $60 Per Metre* for jobs that require a Coating Removal.

These are the factors that we take into account when quoting:
– How many metres require Concrete Grinding
– How thick the coating is on the skirtings
– What the height is of the skirtings that we need to grind
– The condition of the concrete that requires Concrete Grinding
– What service is required (Removal? General Grind? Coating Removal?)
– Access to the site (Stairwell? > Lift?)
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– How many MM may need to be ground down

These prices may vary depending on a large range of factors though, so please only use this as a general guide

– The main deciding factor is ‘What Service Is Required’ for example a simple light grind will be far cheaper than removing a thick Waterproof Coating.

How Much Does It Cost To Remove Pebblecrete From Your Unit Block Wall Skirting Boards

$50 Per Metre*

At Pebblecrete Removal Sydney we charge $50 per metre* for the removal of Pebblecrete Skirting Boards (Unit Block Walls).

These are the factors that we take into account when quoting:

– How many metres require removal
– How thick the coating is on the unit block wall skirting boards
– What the height is of the skirtings that we need to remove
– What level the skirting boards are on the Unit Block Walls
– Scaffolding is required for this type of work at the customer’s expense
– The condition of the concrete that requires removal
– What service is required (Removal? General Grind? Coating Removal?)
– Access to the site (Stairwell? > Lift?)
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– How many MM may need to be ground down

These prices may vary depending on a large range of factors though, so please only use this as a general guide

– The main deciding factor is ‘What Service Is Required’ for example a simple light grind will be far cheaper than removing a thick Waterproof Coating.

How Much Does Concrete Grinding Unit Block Wall Skirting Boards Cost?

General Grind – $10 – $30 Per Metre*

Coating Removal – $10 – $60 Per Metre*

On average Concrete Grinding Skirtings Costs $10 – $30 Per Metre* for jobs that require a General Grind.

On average Concrete Grinding Skirtings Costs $10 – $60 Per Metre* for jobs that require a Coating Removal.

These are the factors that we take into account when quoting:
– How many metres require Concrete Grinding
– How thick the coating is on the skirtings
– What the height is of the skirtings that we need to grind
– The condition of the concrete that requires Concrete Grinding
– What service is required (General Grind? Coating Removal?)
– Access to the site (Stairwell? > Lift?)
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– How many MM may need to be ground down

These prices may vary depending on a large range of factors though, so please only use this as a general guide

– The main deciding factor is ‘What Service Is Required’ for example a simple light grind will be far cheaper than removing a thick Waterproof Coating.

How Much Does It Cost To Remove Pebblecrete From Pillars?

Pebblecrete Removal – $80 Per Side of Pillars

At Pebblecrete Removal Sydney we charge $80 Per Side* for the removal of Pebblecrete Pillars.

These are the factors that we take into account when quoting:

– How many metres require removal and concrete grinding
– How thick the coating is on the unit block wall skirting boards
– What the height is of pillar
– Scaffolding may be required for this type of work at the customer’s expense
– The condition of the concrete that requires removal
– What service is required (Removal? General Grind? Coating Removal?)
– Access to the site (Stairwell? > Lift?)
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– How many MM may need to be ground down

These prices may vary depending on a large range of factors though, so please only use this as a general guide

– The main deciding factor is ‘What Service Is Required’ for example a simple light grind will be far cheaper than removing a thick Waterproof Coating.

How Much Does Concrete Grinding Pebblecrete Pillars Cost?

Concrete Grinding Pillars – $80 Per Side of Pillars

On average Concrete Grinding Pillars Costs $80 Per Metre* for jobs that require a General Grind on pillars.

These are the factors that we take into account when quoting:
– How many metres require Concrete Grinding
– How thick the coating is on the skirtings
– What the height is of the skirtings that we need to grind
– The condition of the concrete that requires Concrete Grinding
– What service is required (General Grind? Coating Removal?)
– Access to the site (Stairwell? > Lift?)
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– How many MM may need to be ground down

These prices may vary depending on a large range of factors though, so please only use this as a general guide

– The main deciding factor is ‘What Service Is Required’ for example a simple light grind will be far cheaper than removing a thick Waterproof Coating.

How Much Does Commercial Concrete Grinding Cost Per Square Metre

General Grind – $5 – $15 Per Square Metre*

Coating Removal – $5 – $20 Per Square Metre*

Commercial Concrete Grinding clients will receive larger discounts depending on how large the area is and what we are removing from the concrete. Here at Concrete Grinding Sydney, we guarantee that we will always be upfront with pricing, with no hidden extras.

On average Commercial Concrete Grinding Costs $5 – $15 Per Square Metre* for jobs that require a General Grind.*

On average Commercial Concrete Grinding Costs $5 – $20 Per Square Metre* for jobs that require Coating Removals.*

These prices may vary depending on a large range of factors though, so please only use this as a general guide.
Click here for a further understanding of “How Much Does Concrete Grinding Cost“

These are the factors that we take into account when quoting:
– How many square metres require Concrete Grinding
– How many MM may need to be ground down
– The condition of the concrete that requires Concrete Grinding
– What service is required (General Grind? Coating Removal?)
– Access to the site (Stairwell? > Lift?)
– What level is the property on?
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)

– The main deciding factor is ‘What Service Is Required’ for example a simple light grind will be far cheaper than removing a thick Waterproof Coating.

Disposal Of All Silica Dust Bags – Commercial & Industrial Jobs

$0 – $300 (Depending on job size)

Here at Concrete Grinding Sydney, we take all your rubbish away with us for disposal at your local resource management centre (recycling whenever possible). This saves our clients hundreds of dollars in hiring skip bins, as well as the frustration of the whole process of hiring one and having to have a skip bin sit in your front yard for days. Most Concrete Grinding jobs will have no disposal of waste cost, but some may. The deciding factor is (How many square metres require concrete grinding is the deciding factor on your disposal of waste charge as the larger the job, the more silica dust bags will be produced. Most jobs will have no disposal fee.)

View Our Floor Levelling Page For More Information
View Our Concrete Grinding Page For More Information
View Our Floor Preparation Blog Post For More Information

Here at Pebblecrete Removal Sydney We Educate Our Clients

Unlike our competitors, here at Pebblecrete Removal Sydney we actually provide information for our clients to ensure they understand the process and pricing and to ensure there are no unexpected surprises. We have more content on our website, our service pages, and blog posts than any other company in Sydney.

We are Sydney’s largest Pebblecrete Removal company that completes tens of thousands of square metres of Pebblecrete Removal projects every year and is trusted by the largest companies and STRATAs throughout Sydney.

Is There Magnesite Flooring In Your Property?

If your home was built in the 1920s – 1980s, it is likely that your home (Especially unit blocks in NSW) could potentially have Magnesite Flooring. Magnesite is present below a flooring system such as carpet. Magnesite is a product used as a noise preventative and a Floor Levelling agent.

Magnesite Flooring absorbs moisture (particularly in areas prone to moisture such as external walls, doorways, around shower recesses, near windows, laundries, etc.) Unfortunately, once Magnesite Flooring absorbs moisture it starts a chemical reaction that will cause Concrete Cancer over long periods of time.

Because your Magnesite Flooring was laid 40 – 100 years ago, it is likely that it has absorbed moisture over the many decades that it has been trapped under your flooring system and it has most likely started to break down and lose its strength making it an unsuitable Floor Levelling product that it once was, as well as very hollow, which destroys its soundproofing.

The best thing you can do to prevent further damage to your property and the concrete slab is to remove it ASAP. Magnesite Flooring consists of Magnesium Oxychloride, which may contain asbestos.

Since it is a health hazard and a major safety risk in NSW, if you remove your flooring system and find out there is Magnesite under it.

YOU MUST remove your Magnesite Flooring for the safety of you and everyone else in your unit block.

Strata may pay to remove your Magnesite Flooring as it is considered “Common property”. Magnesite Flooring can cause Concrete Cancer which is a major risk to everyone’s safety as well as the successful reinstallation of your new flooring system.

NO company will give you any form of warranty or insurance on any flooring installation job on a magnesite floor, which is another reason why it should always be removed.
Click Here To View Our Magnesite Flooring Removal Page

Where Can We Remove Pebblecrete From?

Here at Pebblecrete Removal Sydney we specialise in Pebblecrete Removal from ANY location. We Remove Pebblecrete From:

– Residential Properties
– Commercial Properties
– Industrial Properties
– STRATA Properties
– Government Properties

– Flat Areas (Outside)
– Flat Areas (Inside)
– Verandahs
– Balconies
– Hallways
– Walls
– Garages
– Driveways
– Pillars
– Bathrooms
– Bedrooms
– Laundries
– Planter Boxes
– Patio Areas
– Kitchens
– Rooftops
– Fountains
– Spas
– Stairs
– Pool Stairs
– Around A Pool
– Olympic Pools
– Inside A Pool (Low Depth Only)
– Luxury Indoor Pools (Low Depth Only)
– Skirting Boards (Normal)
– Skirting Boards (Unit Block Walls)

How Long Does Concrete Grinding Take?

Most Concrete Grinding jobs can be completed within 1-2 days (depending on the size of the job and service required)

Jobs that are 0 – 250 square metres will generally be completed in ONE DAY

Jobs that are 250 – 1,000 square metres or more will generally be completed in TWO DAYS or more

Jobs that are 1,000 – 30,000 square metres or more will generally be completed over SEVERAL WEEKS or more

Is Pebblecrete Removal Dangerous?

Yes, Pebblecrete Removal is dangerous.

Pebblecrete Removal without the correct PPE and power tools/equipment will create a harmful silica dust environment, it’s also possible to be injured by tools as well as injured from the Pebblecrete Removal process.

– SERIOUS INJURIES: Sometimes Tiny pieces of Concrete can go flying in the air during the Pebblecrete Removal process, this can accidentally hit your eye causing serious damage if not blindness. The tools required to perform this task are also dangerous to use for people who are not highly skilled in using these tools.

– ACCIDENTAL INJURIES: It’s easy to look up a guide on what tools to use, but injuries often occur from a lack of knowledge of how to use these tools safely.

– PERMANENT LUNG DAMAGE: Inhaling dangerous silica dust by not using the correct PPE and Dust Extractors can be deadly.

The longer silicosis goes without treatment, the more likely it is to develop a complication. Because the disease affects the immune system, silicosis patients are vulnerable to developing tuberculosis, lung cancer, COPD, and kidney disease.

• • Lung Cancer.
  • Chronic Obstructive Pulmonary Disease (COPD)
  • Kidney Disease.
  • Autoimmune Disease.

Breathing in very small (“respirable”) crystalline silica particles, causes multiple diseases, including silicosis, an incurable lung disease that leads to disability and death. Respirable crystalline silica also causes lung cancer, chronic obstructive pulmonary disease (COPD), and kidney disease.

Click Here To Learn More About The Dangers Of Silica Dust