Spraycrete Removal

Spraycrete Removalist

Our Spraycrete Removalist team has completed thousands of jobs through Sydney. Here at Spraycrete Removal Sydney Professionals, We have perfected the strategy of clean, fast, affordable, and efficient Spraycrete Removal throughout Sydney.

We begin by using our Dust-Free Concrete Grinding System which has a commercial dust extractor attached to it. We slowly grind down the Spraycrete depending on how thick the coating is, or if there are multiple coatings we may need to use more aggressive diamonds on our Concrete Grinder to remove all your remaining Spraycrete. The concrete is then vacuumed leaving you with a concrete slab that is ready to accept any new floor coverings, paints, epoxies, waterproofing membranes, floor leveling products, ETC.

– We are a fully insured business with worker’s compensation, insured for public liability and all employees have white card health and safety and COVID vaccinations.

– Our highly trained staff will always work in a safe and efficient manner while using high-quality Personal Protective Equipment (PPE) and Dust Extraction Equipment.

We then take all our mess, dust, and waste to a local resource management centre leaving your property clean and ready for the re-installation of any new flooring system! We keep dust to an absolute minimum. We can’t promise it will be a completely 100% Dust-Free experience. But it will be as close as physically possible you can get to a Dust-Free Spraycrete Removal and Dust-Free Concrete Grinding job. We will always clean up the best that we can and use all the latest methods, technology, and equipment to make it a 90-99.99% Dust-Free Spraycrete Removal experience.

We leave your property clean, vacuumed, and tidied, with all waste removed by our team and disposed of. Most Spraycrete Removal jobs take us less than a day, leaving you to get on with the rest of your project.

Our staff are experienced and professional Spraycrete Removalists, they know exactly how to go about the job of Spraycrete Stripping safely and quickly. Our Spraycrete Removal team prides itself on its customer service, its ability to get the job done when other companies can’t, and an end result that the customer is always happy with.

Spraycrete Removal “Before” & “After” Photos

Removing Spraycrete

Our specialist Removing Spraycrete team at Spraycrete Removal Sydney can remove any type of Spraycrete in any location we are well known throughout Sydney for Removing Spraycrete with great success when other companies or private contractors have failed. When Removing Spraycrete our team will always ensure that we ensure that your concrete that is ready for your next contractor.

Our team are specialists at Removing Spraycrete from your driveway, patio, footpath, stairs, etc. As well as things like removing a Spraycrete System. How far away is your power located from our working area? What equipment is best suited for the job? How thick is the layer of Spraycrete? It all just becomes way too much of a headache for any customer to deal with. So why not hire our specialist team that makes Removing Spraycrete a breeze! no more frustration, no more mess, no more cleaning up, hiring equipment, or having to dispose of the mess!

When Removing Spraycrete from a concrete slab it doesn’t matter what material the Spraycrete is made of.

What’s important is:
1. How the thick the layer of Spraycrete is
2. If multiple coatings of Spraycrete or other agents have been applied
3. If the Spraycrete has been reinforced with any other coatings

Our team specializes in Removing Spraycrete of all types and all installation methods, such as:
– Stencil Concrete Removal
– Stamped Concrete Removal
– Spraycrete Removal
– Spray Pave Removal
– Spray-On Paving Removal
– Spray Paint Stencil Removal

Spraycrete Removal In Sydney

Spraycrete Removal is our specialty our Dust-Free Spraycrete Removal team has completed thousands of jobs in the Sydney region with not one negative review from any of our residential or commercial customers.

Our Dust-Free Spraycrete Removal team has the ability to complete your job in under 1 day as well as offer a free price beat guarantee quotes on any Spraycrete Removal job.

Dust-Free Spraycrete Removal without the proper equipment, tools, specialized machinery, and without a well-trained team can be dangerous as well as take an incredibly long time, so why not have our Dust-Free Spraycrete Removal specialist team come in and do the job for you?

Our Dust-Free Spraycrete Removal team has seen it all! they know how to handle every situation so you know that your job will get completed the first time without any problems or stress! We have over 35+ years of experience in the Dust-Free Spraycrete Removal industry so our customers have no doubt that they are only getting the best of the best team in Sydney to complete their job.

You also have the peace of mind of knowing that we have a flawless reputation and have completed thousands of Spraycrete Removal jobs successfully throughout NSW. Our licensed, insured specialist team will always have an on-site supervisor with them at all times as well.

How Do I Know If My Spraycrete Has Been Reinforced Or Recoated?

If you have just purchased a new property and have Spraycrete Driveways and you are unsure if there is just one layer or if multiple layers have been installed, or possibly a concrete sealer, paint, epoxy, etc under or on top of your Spraycrete, the easiest way to check is to find anywhere that the Spraycrete is “flaking up” and trying to scratch chisel, hammer, hand grind, cut, whatever you can to try to reveal how many layers there truly is. So that we can accurately quote you.

Regarding:
– Spraycrete Driveways

They normally only have one coating, but sometimes they have a second coating applied in an attempt to hide the previous Spraycrete Coating that was starting to fail.

Regarding:
– Spraycrete Patios
– Spraycrete Backyards
– Spraycrete Around A Pool
– Spraycrete Around A Fireplace
– Spraycrete Footpath
– Spraycrete Stairs

These are often reinforced with a coating such as concrete sealer, making them harder to remove with a concrete grinder. They also can have thicker coatings, Sometimes making them impossible to concrete grind, Which requires heavier equipment to be bought such as a concrete scarifier as the thickness of the Spraycrete in these areas is normally much thicker and can be “reinforced“

Spraycrete Removal Cost (Single Layer)

$30 – $60 Per Square Metre*

Spraycrete Removal Price (Double, Triple Layer, or Reinforced With Another Product)
$60 – $90 Per Square Metre*

Spraycrete Removal Costs can vary quite a lot from company to company or private contractor regarding the cost of Spraycrete Removal, here at Dust-Free Spraycrete Removal Sydney we guarantee that we’ll always have the lowest Spraycrete Removal cost in Sydney. We will always be upfront with the Spraycrete Removal Cost, with no hidden extras.

Our Spraycrete Removal (Single Layer) Costs are:
$30 – $60 per square metre*

Our Spraycrete Removal (Double, Triple Layer or Reinforced) Cost are:
$60 – $90 Per Square Metre*

Feel free to use our Square Meter Calculator if you would like to calculate your Spraycrete Removal Cost.

Other Spraycrete Removal contractors and Stencil Concrete Removal companies that Remove Spraycrete regardless of job size will make you hire a skip bin for the silica dust bags. Which will cost a huge amount ($375 – $1,000+). Which will have to sit in your front yard for days while you deal with the annoyance of organising it and the large cost of the whole process.

Here at Dust-Free Spraycrete Removal Sydney, we come in, Remove Your Spraycrete, then our team will grind back your slab to remove any remaining Spraycrete residue, and then we will sweep and vacuum your concrete to clean up any remaining dust!

Then once we are finished, we will also take all the waste to a local resource management centre for you (Recycling whenever possible) which will be far cheaper than you having to hire a skip bin and dealing with the frustration of that whole process!

To obtain a Free Price Beat Guarantee Quote from Australia’s #1 Dust-Free Spraycrete Removal Business simply fill out our:
Free Online Quote Form!

You can also contact us directly on:
0424 408 330

Or email us at:
Enquiries@CarpetRemovalSydney.com.au
For a free quote & site inspection today.

We will ALWAYS Beat All Of Our Competitors Quotes By Up To 10%*

Dust-Free Spraycrete Removal

Will The Job Be 100% Dust-Free?

How Do We Achieve An Almost 90 – 99.99% Dust-Free Flooring Removal and Concrete Grinding Experience For Our Clients?

Here at Dust-Free Spraycrete Removal Sydney, we specialize in Dust-Free Spraycrete Removal. We employ a specialty system that suctions and removes dust and debris directly from our tools into a powerful commercial dust extractor. Our equipment is powerful, strong, and guaranteed to significantly reduce, or even completely eradicate, the dust and debris that is often associated with Dust-Free Spraycrete Removal and replacement projects.

Our specially designed dust-free equipment makes the Spraycrete Removal process much faster than traditional Spraycrete Removal. It is also more efficient than traditional removal techniques and is substantially cleaner and safer. This gives our Dust-Free Spraycrete Removal process the added benefit of being the most environmentally friendly solution.

After the Dust-Free Spraycrete Removal process, we will grind your concrete slab with the use of high-powered Dust-Free Concrete Grinding equipment that is connected directly to a high-powered commercial dust extractor. We will also perform demolition services with the use of high-powered commercial dust extraction equipment plugged directly into our tools.

Unfortunately, small amounts of dust are still produced and cannot be completely eliminated even with the most expensive high-end equipment and the latest technology. It should also be noted that certain equipment such as Jackhammers has a harder time trying to contain the dust even with the use of high-end dust extractors. While Concrete Grinders are able to contain dust a lot more easily. (Roughly 90 – 99.99% of the dust is still sucked up by a 3-engine high-powered commercial dust extractor that is plugged directly into the equipment) but sometimes a small amount of dust can still escape.

If you are concerned about the small amounts of dust that may possibly get into areas that we are not working in such as the kitchens, bathrooms, cabinets, etc. we would advise that you seal off those areas that we are not working in with plastic and sticky tape before our team arrives to avoid delays.

Click Here To Learn More About Dust-Free Flooring Removal and Concrete Grinding

How Much Does Concrete Grinding Cost Per Square Metre?

General Grind – $10 – $60 Per Square Metre*

Coating Removal – $10 – $90 Per Square Metre*

How Much Does Concrete Grinding Cost Per Square Metre? Concrete Grinding costs vary quite a lot from company to company or private contractor to private contractor. Here at Concrete Grinding Sydney, we guarantee that we will always be upfront with pricing, with no hidden extras.

On average Concrete Grinding Costs $10 – $60 Per Square Metre for jobs that require a General Grind.

On average Concrete Grinding Costs $10 – $90 Per Square Metre for jobs that require a Coating Removal.

These are the factors that we take into account when quoting:
– How many square metres require Concrete Grinding
– How many MM may need to be ground down
– The condition of the concrete that requires Concrete Grinding
– What service is required (Removal? General Grind? Coating Removal?)
– Access to the site (Stairwell? > Lift?)
– What level is the property on?
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)

Other Concrete Grinding contractors and Concrete Grinding companies that Grind Concrete do not meet the standards that we do at Concrete Grinding Sydney. We use only the highest quality products that are available on the market.

Here at Concrete Grinding Sydney, we come in and do a swift Floor Preparation and Concrete Grinding service for all of our clients, We Concrete Grind and Prime all floors prior to Floor Levelling to ensure a flawless installation without failure.

– The main deciding factor is ‘What Service Is Required’ for example a simple light grind will be far cheaper than removing a thick Waterproof Coating.

How Much Does It Cost To Remove Spraycrete From Your Stairs?

Stairs – $20 – $40 Per Step*

Landings – $40 – $80 Per Landing*

On average Spraycrete Removal from your Stairs will cost $20 – $40 Per Step for jobs that require Hand Grinding.

On average Spraycrete Removal from your Stairs will cost $40 – $80 Per Landing for jobs that require Hand Grinding.

These are the factors that we take into account when quoting:
– How many steps and landings require Hand Grinding
– The size of the steps (Extra Wide or Extra Long Steps may increase the prices listed above)
– How thick the coating is on the stairs
– The condition of the concrete that requires Hand Grinding
– What service is required (Removal? General Grind? Coating Removal?)
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– Access to the site (Stairwell? > Lift?)
– How many MM may need to be ground down

These prices may vary depending on a large range of factors though, so please only use this as a general guide.

– The main deciding factor is ‘What Service Is Required’ for example a simple light grind will be far cheaper than removing a thick Waterproof Coating.

How Much Does Concrete Grinding Skirting Boards Cost?

General Grind – $10 – $30 Per Metre*

Coating Removal – $10 – $60 Per Metre*

On average Concrete Grinding Skirtings Costs $10 – $30 Per Metre* for jobs that require a General Grind.

On average Concrete Grinding Skirtings Costs $10 – $60 Per Metre* for jobs that require a Coating Removal.

These are the factors that we take into account when quoting:
– How many metres require Concrete Grinding
– How thick the coating is on the skirtings
– What the height is of the skirtings that we need to grind
– The condition of the concrete that requires Concrete Grinding
– What service is required (Removal? General Grind? Coating Removal?)
– Access to the site (Stairwell? > Lift?)
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– How many MM may need to be ground down

These prices may vary depending on a large range of factors though, so please only use this as a general guide

– The main deciding factor is ‘What Service Is Required’ for example a simple light grind will be far cheaper than removing a thick Waterproof Coating.

How Much Does Commercial Concrete Grinding Cost Per Square Metre

General Grind – $5 – $15 Per Square Metre*

Coating Removal – $5 – $20 Per Square Metre*

Commercial Concrete Grinding clients will receive larger discounts depending on how large the area is and what we are removing from the concrete. Here at Concrete Grinding Sydney, we guarantee that we will always be upfront with pricing, with no hidden extras.

On average Commercial Concrete Grinding Costs $5 – $15 Per Square Metre* for jobs that require a General Grind.*

On average Commercial Concrete Grinding Costs $5 – $20 Per Square Metre* for jobs that require Coating Removals.*

These prices may vary depending on a large range of factors though, so please only use this as a general guide.
Click here for a further understanding of “How Much Does Concrete Grinding Cost“

These are the factors that we take into account when quoting:
– How many square metres require Concrete Grinding
– How many MM may need to be ground down
– The condition of the concrete that requires Concrete Grinding
– What service is required (General Grind? Coating Removal?)
– Access to the site (Stairwell? > Lift?)
– What level is the property on?
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)

– The main deciding factor is ‘What Service Is Required’ for example a simple light grind will be far cheaper than removing a thick Waterproof Coating.

Disposal Of All Silica Dust Bags – Commercial & Industrial Jobs

$0 – $300 (Depending on job size)

Here at Spraycrete Removal Sydney, we take all your rubbish away with us for disposal at your local resource management centre (recycling whenever possible). This saves our clients hundreds of dollars in hiring skip bins, as well as the frustration of the whole process of hiring one and having to have a skip bin sit in your front yard for days. Most Concrete Grinding jobs will have no disposal of waste cost, but some may. The deciding factor is (How many square metres require concrete grinding is the deciding factor on your disposal of waste charge as the larger the job, the more silica dust bags will be produced. Most jobs will have no disposal fee.)

View Our Floor Levelling Page For More Information
View Our Concrete Grinding Page For More Information
View Our Floor Preparation Blog Post For More Information

Here at Spraycrete Removal Sydney We Educate Our Clients

Unlike our competitors, here at Spraycrete Removal Sydney we actually provide information for our clients to ensure they understand the process and pricing and to ensure there are no unexpected surprises. We have more content on our website, our service pages, and blog posts than any other company in Sydney.

We are Sydney’s largest Spraycrete Removal company that completes tens of thousands of square metres of Spraycrete Removal projects every year and is trusted by the largest of companies and STRATAs throughout Sydney.

Is There Magnesite Flooring In Your Property?

If your home was built in the 1920s – 1980s, it is likely that your home (Especially unit blocks in NSW) could potentially have Magnesite Flooring. Magnesite is present below a flooring system such as carpet. Magnesite is a product used as a noise preventative and a Floor Levelling agent.

Magnesite Flooring absorbs moisture (particularly in areas prone to moisture such as external walls, doorways, around shower recesses, near windows, laundries, etc.) Unfortunately, once Magnesite Flooring absorbs moisture it starts a chemical reaction that will cause Concrete Cancer over long periods of time.

Because your Magnesite Flooring was laid 40 – 100 years ago, it is likely that it has absorbed moisture over the many decades that it has been trapped under your flooring system and it has most likely started to break down and lose its strength making it an unsuitable Floor Levelling product that it once was, as well as very hollow, which destroys its soundproofing.

The best thing you can do to prevent further damage to your property and the concrete slab is to remove it ASAP. Magnesite Flooring consists of Magnesium Oxychloride, which may contain asbestos.

Since it is a health hazard and a major safety risk in NSW, if you remove your flooring system and find out there is Magnesite under it.

YOU MUST remove your Magnesite Flooring for the safety of you and everyone else in your unit block.

Strata may pay to remove your Magnesite Flooring as it is considered “Common property”. Magnesite Flooring can cause Concrete Cancer which is a major risk to everyone’s safety as well as the successful reinstallation of your new flooring system.

NO company will give you any form of warranty or insurance on any flooring installation job on a magnesite floor, which is another reason why it should always be removed.
Click Here To View Our Magnesite Flooring Removal Page

Where Can We Remove Spraycrete From?

Here at Spraycrete Removal Sydney we specialise in Spraycrete Removal from ANY location. We Remove Spraycrete From:

– Residential Properties
– Commercial Properties
– Industrial Properties
– STRATA Properties
– Government Properties

– Flat Areas (Outside)
– Flat Areas (Inside)
– Verandahs
– Balconies
– Hallways
– Garages
– Driveways
– Pillars
– Bedrooms
– Patio Areas
– Rooftops
– Fountains
– Spas
– Stairs
– Pool Stairs
– Around A Pool
– Inside A Pool (Low Depth Only)
– Luxury Indoor Pools (Low Depth Only)
– Skirting Boards (Normal)

How Long Does Spraycrete Removal Take?

Most Spraycrete Removal jobs can be completed within 1-2 days (depending on the size of the job and service required)

Jobs that are 0 – 250 square metres will generally be completed in ONE DAY

Jobs that are 250 – 1,000 square metres or more will generally be completed in TWO DAYS or more

Jobs that are 1,000 – 30,000 square metres or more will generally be completed over SEVERAL WEEKS or more

Is Spraycrete Removal Dangerous?

Yes, Spraycrete Removal is dangerous.

Spraycrete Removal without the correct PPE and power tools/equipment will create a harmful silica dust environment, it’s also possible to be injured by tools as well as injured from the Spraycrete Removal process.

– SERIOUS INJURIES: Sometimes Tiny pieces of Concrete can go flying in the air during the Spraycrete Removal process, this can accidentally hit your eye causing serious damage if not blindness. The tools required to perform this task are also dangerous to use for people who are not highly skilled in using these tools.

– ACCIDENTAL INJURIES: It’s easy to look up a guide on what tools to use, but injuries often occur from a lack of knowledge of how to use these tools safely.

– PERMANENT LUNG DAMAGE: Inhaling dangerous silica dust by not using the correct PPE and Dust Extractors can be deadly.

The longer silicosis goes without treatment, the more likely it is to develop a complication. Because the disease affects the immune system, silicosis patients are vulnerable to developing tuberculosis, lung cancer, COPD, and kidney disease.

• • Lung Cancer.
  • Chronic Obstructive Pulmonary Disease (COPD)
  • Kidney Disease.
  • Autoimmune Disease.

Breathing in very small (“respirable”) crystalline silica particles, causes multiple diseases, including silicosis, an incurable lung disease that leads to disability and death. Respirable crystalline silica also causes lung cancer, chronic obstructive pulmonary disease (COPD), and kidney disease.

Click Here To Learn More About The Dangers Of Silica Dust

Why Do I Need A Professional For Spraycrete Removal?

– SPEED: Hiring a professional company to remove your Spraycrete is incredibly faster than attempting to do the project yourself.

– COST: Here at Spraycrete Removal Sydney we have very reasonable prices and offer a Price Beat Guarantee. We can often complete your project for a fair price compared to the costs of attempting to remove the Spraycrete Removal yourself. When it comes to larger Spraycrete Removal jobs, it will always be cheaper to leave it up to the professionals at Spraycrete Removal Sydney!

– READY: Rather than slowly completing your job on your hands and knees, we can complete your project within a short period of time to ensure that your home is ready for the next part of your renovation project.

How Does Spraycrete Removal Work?

1) Our team will provide you with a free quote for Dust-Free Spraycrete Removal.

2) Our team will come to your property, and remove all Spraycrete on-site.

3) Our team will clean your property.

4) Our team will take all rubbish/waste to a disposal centre for recycling.

5) Our team will evaluate your concrete to see if any Concrete Cancer Repairs, Concrete Crack Repairs, or Floor Levelling is required.

9) Finally! We have completed your job! and your roof is ready for the re-installation of a new Coating or Flooring System.

Is Spraycrete Removal Hard?

Yes, Removing Spraycrete can be a difficult and time-consuming project and the challenges often remain hidden until the project is underway. Depending on the installation method and how the Spraycrete has been installed.

If you have a Spraycrete Removal job that is over 10 square metres, it is considered a hard task, that will be expensive and frustrating to attempt to do yourself. It’s often cheaper to hire a Spraycrete Removal contractor than to hire the tools, PPE, and other equipment required to attempt the project yourself.

There are several different installation methods. We only recommend attempting Spraycrete Removal yourself if the project is under 10 square metres and you have the appropriate tools, PPE, and dust extraction equipment.

For jobs over the size of 10 square metres, we ALWAYS recommend leaving it up to the professionals.
Contact Us Now For A Free Quote!

What Is The Easiest Way To Remove Spraycrete?

Simply contacting a professional company to provide the service for you will take the stress away, and be fast, efficient, and clean.

Contact Us Now For A Free Quote!

Is Spraycrete Removal Required Before I Install A New Coating Or Flooring System?

Yes, Spraycrete Removal should always occur prior to the installation of a new Coating or Flooring System. The appropriate Floor Preparation prior to installing the new Coating or Flooring System system is also required.

To install a new Coating or Flooring System you must ensure:
1) The previous Spraycrete has been removed
2) All residue from the previous Spraycrete has been removed
3) The appropriate floor preparation has been applied
– Concrete Cancer Repairs
– Concrete Crack Repairs
– Concrete Grinding
– Floor Levelling

Click Here To Learn More About Why Floor Preparation Is Required

What Is The Fastest Way To Remove Spraycrete?

Shot Blasters:
Shot Blasters are simply the easiest and best way to Remove Spraycrete. Although this equipment is best left up to the professionals to use. Leaving the Spraycrete Removal project up to the professionals is simply the fastest way to Remove Spraycrete.

We have specalised equipment such as Concrete Grinders, Concrete Scarifiers, Shot Blasters, Bush Hammers, PCDs, and everything you can imagine to tackle every project.

Our team has the highest quality and most expensive Concrete Grinding, Concrete Scarifiers, and Shot Blasters equipment to remove the Spraycrete so you know you are not only getting the best team in Sydney. But also the most well-equipped.